408 Oak Street Mooresville, NC 28115 Phone (704) 663-7007 Fax (704) 663-7875 E-mail: music.electronics@gmail.com |
 |
Leslies - New, Pre-Owned and Consignment
Our pre-owned and vintage equipment, is equipment we have taken in on trade or purchased from a customer. This equipment has been checked to be in good working condition. Consignment equipment is equipment owned by a customer that no longer has a need for it and wants to find it a new home.
 |
Leslie 122XBThe Classic Leslie Speaker, made to Don Leslie’s “Original Recipe”, same as it has been since 1941. This two-speed speaker uses a traditional tube amplifier with a heavy duty driver in the horn and special design 15” woofer for the bass rotor. Connections are made via the 11-pin plug found on all modern Hammonds, and certain clones. For older Hammond models, adapter kits are available. A few concessions to modern times have been added, such as a ¼” “guitar cord” input, and a jack for a footswitch; thus eliminating the need for a bulky cable and “preamp box.” |
$1499.95 | S-0001 sn 96060106 |
 |
Leslie 3300The Leslie 3300 is one of the most powerful Leslies ever offered, and has been designed with the professional touring musician in mind. This single-channel Leslie features a two-speed horn rotor coupled to Hammond's newly-designed heavy-duty midrange/high-frequency driver and a massive 15” woofer which fires into the bass rotor. The Leslie 3300 is powered by a total of 300 watts RMS solid-state amplification with a vacuum tube preamp. Amplification is divided between a 220-watt dedicated bass amplifier powering the woofer and an 80-watt mid-high frequency amplifier for the rotating horn's driver. The 3300's 11-pin and 8-pin Leslie sockets allow connection and on-board control with Hammond Organs. Most other electronic organs and keyboards can connect to the 3300 using a ¼” cable along with a common foot switch (optional) for Leslie speed control. This Leslie features a rugged-built, high-impact finished black cabinet which is lighter than a traditional Leslie and the heavy-duty casters will make it a snap to transport to your next performance. |
$1800.00 | C-3321 sn xxxxxx |
 |
Leslie 525The Leslie 525 stationary speaker system is designed to amplify and enhance the sound of most keyboard, organ, and electronic piano products on the market today. It can also be used to add an additional channel (or channels) to any Leslie speaker working in conjunction with a multi-channel organ. This new Leslie features a a total of 300-watts RMS solid-state amplifier divided between a 220-watt bass amplifier and an 80-watt high-frequency amplifier. The 3301 also contains five speakers: one 550-watt, 15” woofer, 2- 5 1/4” mid-range speakers, and 2 –1” tweeters which together produce extremely clean highs and a solid deep bass that you can actually feel. An-11pin Leslie jack as well as a ¼” Line Input jack are provided. This Leslie has been designed to be placed either on top of any traditional Leslie Tone Cabinet or in a remote location. |
$1695.00 | S-3321 sn 08050016 |
 |
Leslie 971This Leslie is designed for the musician who demands full-spectrum sound. Its new thunderous 300-watt solid-state amplifier has more than enough power to be clearly heard at your next rock concert or church service. This single-channel Leslie features a two-speed horn and bass rotor. An 11-pin Leslie connector, ¼” line input jack, foot switch jack and an ¼”line input jack is provided. The Leslie 971 contains a massive 15” woofer and the world-famous Ferro Fluid driver. |
$3295.00.00 | NS-0001 sn 09060048 |
 |
Leslie 2101 RotaryWhen you want the authentic LESLIE sound, but cannot accommodate the size and weight of a traditional Leslie, or, frankly, cannot afford it; reach for the 2101mk2. It’s the “top half” of Hammond's traditional Leslie with all the unique and patented features that musicians have come to depend on, coupled with a perfect digital simulation of the lower rotor. When you consider the onboard tube preamp and the widest range of “tweakability” of any Leslie ever, the 2101mk2 is a clear choice for pro and hobbyist alike. |
$1495.00 | S-0001 sn 06071363 |
 |
Leslie 322Leslie 322 (manufacturer is Hammond-Suzuki) Weight: 110 lbs Dimensions: 27"H x 25 3/4"W x 20"D Amplification: Bass Amp 65 watts RMS Horn Amp 35 watts RMS solid state cross-over is fixed at 800Hz Controls: Master volume, bass tone, treble tone, power switch, remote switch Inputs: 11-pin Leslie male connector compatible w/ XB organs, 1/4" guitar style input, 1/4" footswitch jack for rotor speed (footswitch not included), standard AC power receptacle w/ 10' cord. Speaker System: rotor for highs, front mounted 12" speaker with electronic rotor simulation for lows. |
$795.00 | S-0001 sn 94080019 |
 |
Leslie 910 Bass and TrebleThe Model 910 is a two-piece cabinet (complete top horn assembly in separate box) and built-in reverb. The solid state amplifier produces 100W. The reverb channel uses two 6x9" speakers in the top part of the cabinet.The top half of the speaker is connected to the bottom half with two cables - one for audio signals, one for motor power. |
$1495.00 | S-0001 sn H40694B/T |
 |
MotionSound Pro3 Leslie SimulatorThe PRO-3 is a Leslie simulator with a twist; rather than simulate the Leslie rotating speaker's audio characteristics purely electronically, it uses an actual rotating treble horn with a compression driver and a solid state amplifier for frequencies above 700Hz. Frequencies below 700Hz pass through a stereo bass rotor simulator and is made available at 1/4" output jacks for use with a user-supplied amplifier. Though not a rackmountable unit, the PRO-3 is a small, lightweight, and highly portable package. |
Call | C-3321 |
 |
Combo Pre-Amp 020875Connect your instruments to your Leslie 145 - 147 with this pre-amp. Uses a 6-pin Leslie cable. |
$149.00 OBO |
S-0001 sn |
 |
Deluxe Combo Pre-Amp 039420Connect your instruments to your 900 series Leslie with this pre-amp. Uses a 9-pin Leslie cable. |
$129.00 OBO |
S-0001 sn |